LIVRE
     
    • J.C. Cuillière " Introduction à la méthode des éléments finis ", Éditions Dunod, Août 2011, ISBN 978-210056438


    ARTICLES DE REVUES SCIENTIFIQUES

       
    • J.C. Cuillière , S. Bournival, V. François, " Contribution à l’automatisation des analyses par éléments finis multidimensionnelles - Towards the automation of mixed-dimensional finite element analysis ", Mécanique et Industries, Vol 12, pp513–531, 2011 (doi:10.1051/meca/2011146).
    • J.C. Cuillière, V. Francois, K. Souaissa, A. Benamara, H Hadjsalah " Automatic comparison and remeshing applied to CAD model modification ", Computer Aided Design Vol 43, pp 1545-1560, 2011 (doi:10.1016/j.cad.2011.08.007).
    • K. Souaissa, J.C. Cuillière, V. Francois, A. Benamara, H Hadjsalah " Automatic modification retrieval between CAD parts ", Mécanique et Industries, Vol 11 pp85–92, 2010 (doi: 10.1051/meca/2010020).
    • J.C. Cuillière , S. Bournival, V. François, " A mesh-geometry-based solution to mixed-dimensional coupling", Computer Aided Design Vol 42, pp 509-522, 2010 (doi:10.1016/j.cad.2010.01.007)
    • S. Bournival, J.C. Cuillière ,V. François, "A mesh-geometry based method for coupling 1D and 3D elements", Advances in Engineering Software Vol 41, pp 838-858, 2010 (doi:10.1016/j.advengsoft.2010.02.004)
    • V. Francois, J.C. Cuillière, "A Unified Topological Model (UTM) for Integrated Analysis", Revue d’Ingénierie Numérique Collaborative, Vol 1, No 4, 2009.
    • S. Bournival, J.C. Cuillière, V. Francois " Méthode de couplage automatique d’éléments finis 1D, 2D et 3D pour l’analyse multidimensionnelle", Revue d’Ingénierie Numérique Collaborative, Vol 1, No 3, 2009.
    • G. Foucault, J.C. Cuillière , V. François, J.C Léon, R. Maranzana, "Adaptation of CAD model topology for Finite Element Analysis ", Computer Aided Design Vol 40, No 2, pp 176-196, Feb 2008 (DOI:10.1016/j.cad.2007.10.009)
    • E. Béchet, E. Ruiz, J.C. Cuillière, F. Trochu, "Re-meshing algorithms applied to resin transfer moulding simulations", Journal or Reinforced Plastics and Composites, Vol 23, Jan 2004, pp17-36.
    • E Bechet, E Ruiz, F Trochu, J-C Cuillere "Adaptive mesh generation for mould filling problems in resin transfer moulding", Composites : Part A, Vol 34 (2003), pp 813-834.
    • V. Francois, J.C. Cuillière "An a priori adaptive 3D advancing front mesh generator integrated to solid modeling", Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic, Publisher, 2003, p337-346.
    • E. Béchet, J.C. Cuillière, F. Trochu, "Generation of a Finite Element Mesh from Stereolithography (STL) Files", Computer Aided design, Vol 34 No 1, pp 1-17, Jan 2002.
    • E. Béchet, J.C. Cuillière, F. Trochu, "Génération d’un maillage pour éléments finis à partir de fichiers de stéréolithographie – Une interface indépendante des formats CAO ", Revue Internationale de CFAO et d’Informatique Graphique, Vol 17, No 1-2, 2002.
    • V. Francois, J.C. Cuillière "A set of new tools for the automatic meshing and remeshing of mechanical parts",  Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, 2002, pp 157-165.
    • V. Francois, J.C. Cuillière, "3D Automatic Remeshing Applied to Model Modification", Computer Aided Design, Vol 32, Juin 2000, pp 433-444.
    • V. Francois, J.C. Cuillière, "Automatic mesh pre-optimization based on the geometric discretization error", Advances in Engineering Software, Vol 31, Aout 2000, pp 763-774 .
    • J.C. Cuillière, R. Maranzana "Automatic and a priori refinement of three-dimensional meshes based on feature recognition techniques", Advances in Engineering software, Vol 30, 1999, pp 563-573
    • J.C. Cuillière "A direct method for the automatic discretization of 3D parametric curves", Computer  Aided Design, Vol 29, Sept 97, pp. 639-647
    • J.C. Cuillière "An adaptive method for the automatic triangulation of 3D parametric surfaces", Computer Aided Design, Vol 30 No 2, pp139-149, 1998.
    • J.C. Cuillière, D. Deneux, R. Maranzana "Integrated CAD and CAPP around Feature Recognition Techniques", Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, 1997, pp 83-93.
    • V. Francois, J.C. Cuillière, M. Gueury "Méthodes de remaillage automatique appliquées à la modification de modèle", Revue Européenne des Éléments Finis, Vol 8, No 4, Juillet 1999, pp 433-454.
    • V. Francois, J.C. Cuillière, M. Gueury "Automatic mesh generation and regeneration in the simultaneous engineering context ", Research in Engineering Design, Vol 11, 1999, pp 55-66.
    • V. Francois, J.C. Cuillière, M. Gueury "Méthodes de remaillage automatique dans le contexte de  l’ingénierie simultanée ", Revue Internationale de CFAO et d’Informatique Graphique, Vol 12, No 5, Oct 97, pp 531-552.
    • J.C. Cuillière, R. Maranzana, M. Gueury, "Intégration à un modèle géométrique dual du maillage de domaines tridimensionnels appliqué aux méthodes numériques", Revue Européenne des éléments finis, Vol 5 No 2 pp 143-161 (1996).
    • D. Koffi, J.C. Cuillière, "Étude des régimes et des paramètres de lubrification des engrenages en  matériaux thermoplastiques", Revue matériaux et Techniques, Paris
    • J-F, Zimmermann, B. Masson, S. Dufour and J-C. Cuillière, "Modelling of the thermal cycles in a steel plate during welding", J. of Mater., 1999, 19, (4,5 et 6) pages 73-88.